casesforiphone5

A Thermal POS Printer drum must be cleaned if you see that your printed pages own lines, blotches and or the excessive of toner. The drum is really sensitive so you are allowed to clean it if you see that there is a risk for damaging it. To clean your Thermal POS Printer drum, you can consult the technician so you will know the procedure you must do and you can prevent the bad thing which can happen.

In fact, you can clean the drum by yourself but you must be sure that you get the best information that will lead you to the right process. To help you in following the procedures, you can check the review below.

1.  For the first step, you must open the Thermal POS Printer and do removing the toner of your cartridge.
2.  For the next procedure, you need to inspect the drum so you know what happens with
it. If you think that it is dirty, you must clean it. But, if you feel that it is damage, it must be replaced so it can work properly.
3. If it is dirty, you must remove any spots of toner with the use of pliers or tweezers. In this process, you must be careful so you will not scratch the surface that can cause it damage.
4. Then, you have to dip cotton in a rubbing alcohol so you can swipe any oil gently. You must be careful in the process so you can minimize to make it damage.
5. Also, you need to put some drops of alcohol on a lint-free cloth which is soft to some areas that look dirty. In cleaning the drum, you must be careful in wiping it.
6. For the next step, you must check other parts and clean them carefully. After the process is done, you must install them back and test it to know that it has already worked properly.

Related Reading:

Thermal receipt Printer        Thermal Label printer